COLCHESTER Mastiff with 2000mm & 3000mm between centres. 280mm (11”) centre lathe with induction hardened bedways, quick change universal gearbox, self contained motor driven by 11kw motor and electrical equipment for 380 or 415/3/50Hz supply. Variable speed drive from 18-1800 rev/min with apron mounted controls. Two axis fast traverse with single lever control from apron.
COLCHESTER Magnum LS with swing capacities of 660mm and 810mm respectively. Induction hardened and ground bed. Heavy duty contanst power spindle drive motor. Precision hardened and ground gears in headstock. Precision spindle running on Gamet ultra high precision taper roller bearings.
COLCHESTER Magnum VS Heavy duty centre lathes are renowned for quality and reliable turning. Has the strength and standard production features to meet almost any large turning requirement. Available upto 6000mm between centres.
The EUROPA eturn VS560 is built around a 560mm dia swing over the bed, electronic variable speed and is available from 950mm to 2950mm between centres. Din8605 quality lathe package from RK International.
With a 360mm swing over the bed, centre distances of 750mm and 1000mm, the EUROPA eturn VS360 is an ideal small toolroom machine. need to replace a Colchester student or Master lathe?
HARRISON M300 165mm (6.5”) Centre lathe with induction hardened bedways, Quick change universal gearbox, Self contained motor driven by 2.2kw (3hp) motor, Electrical equipment for 220, 380 or 415/3/50Hz supply, 12 spindle speed 40-2500 rpm
The EUROPA eturn VS330 is the most compact model in the range. With a 330mm swing over the and choice of 750mm or 1000mm between centres.
EUROPA eturn VS510 – 510mm swing over the bed and offering between centres of 950, 1450, 1950 and 2950mm the EUROPA eturn VS510 provides all round capability.
With a 460mm swing over the bed (710mm in the gap) and from 950mm to 2950mm between centres, the EUROPA eturn VS460 provides versatility.
EUROPA eturn VS390. The workhorse of any workshop or toolroom, a 390mm swing over the bed and choices of 760, 1000 or 1250mm between centres. Newall DRO and Bison Chucks are standard across the Europa Lathe Range.
HARRISON V390 195mm (7 ½”) Centre Lathe with induction hardened bedways, Quick change universal gearbox, Self contained motor driven by 7.5kw (10hp) motor, Electrical equipment for 380 or 415/3/50Hz supply, Variable speed drive from 14-2500 rev/min with apron control
HARRISON V460 230mm (9 inch) centre lathe with induction hardened bedways, quick change universal gearbox, self contained motor driven by 11kw motor and electrical equipment for 380 or 415/3/50Hz supply. Variable speed drive from 20-2000 rpm with apron mounted controls. Two axis fast traverse with single lever control from the apron.
Call Now 01322 447611
