Specification Haas TM1P X axis traverse 762mm Y axis traverse 305mm Z axis traverse 406mm Table size 1213 x 267mm Maximum weight on table 454kg Spindle taper BT40 Spindle speed 0 – 6000rpm Spindle motor 5.6kW Rapid federate 5.1m/min Weight 2050Kg Haas TM1P Machine Equipped With 10 station toolchanger Coolant system Enclosed guarding Haas TM1P […]
Haas TM1P CNC Toolroom Milling Machine with Traverses: X-762mm, Y-305mm, Z-406mm. Table size 1213 x 267mm. Spindle speeds 0-6000rpm.
Haas Mini Mill CNC Machining Centre with traverses: X-406mm, Y-305mm, Z-254mm. Table size 914 x 305mm. Spindle speeds 0-6000rpm.
Haas Model VF4 Vertical CNC Machining Centre with traverses: X-1270mm, Y-508mm, Z-635mm. Table size 1321 x 457mm. Spindle speeds 0-7500rpm. Equipped with HRT 210 4th Axis.
Haas Mini Mill CNC Machining Centre. Traverses: X-406mm, Y-305mm, Z-254mm. Table size 914 x 305mm. Spindle speeds 0-6000rpm. Equipped with MPA Speed increaser.
Images are for illustrative purposes only.
With a 580 x 410 x 480mm travels and a 840 x 420mm table, this HEIDENHAIN 2500 controlled VMC is fitted with a BT40 spindle along with a 4th axis Interface.
Haas Model VF-0 Vertical Machining Centre with a table size of 660 x 356mm. Spindle speeds 0-7500rpm. Equipped with swarf auger.
Haas VF2 SS Vertical Machining Centre with traverses:- X-762mm, Y-406mm, Z-508mm. Table size 914 x 356mm. Spindle speeds 0-12000rpm. Fitted with swarf auger, through spindle coolant, programmable coolant nozzle, lighting and guarding.
Manufactured in the USA, this HAAS VF1 provides a compact work envelope with a 508 x 406 x 508mm XYZ travel. Complete with a 7,500rpm, BT40 spindle driven via a gearbox for increased cutting torque, this machine complete with Swarf Auger for chip management can be seen under power at RK International under power by prior arrangement.
Specification Haas TM1P X axis traverse 762mm Y axis traverse 305mm Z axis traverse 406mm Table size 1213 x 267mm Maximum weight on table 454kg Spindle taper BT40 Spindle speed 0 – 6000rpm Spindle motor 5.6kW Rapid federate 5.1m/min Weight 2050Kg Haas TM1P Machine Equipped With 10 station toolchanger Coolant system Enclosed guarding Haas TM1P […]
MACH 1062-HD Vertical Machining Centre wither either Fanuc 0iMF, Siemens 828D or Heidenhain iTNC 620 Control. Equipped with Spindle chiller, Swarf conveyor and bed wash.
A 5-axis machining center with second X especially suited for machining of panels and profile-matching. The Mega-Flex is an ideal machine for finishing aluminium profiles with very large sections (profile panels). Due to the large profile section we are also able to finish frames used for mass transportation. The Mega-Flex is a Gantry machine with 5-axis milling motor of 25 KW, 39.5 KW or 44 KW with a tool turret of 36 places.