Harrison M500 Gap Bed Centre Lathe with 530mm swing x 2000mm between centres. Spindle bore 80mm. Equipped with Newall Topaz 2 axis DRO System.
This a fine example of a used Harrison M500. Give us a call to talk used lathes.
Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe.
Harrison Alpha 400T with 400mm swing x 1250mm between centres. Spindle bore 54mm. Equipped with 3 & 4 Jaw chucks. Parat toolpost and 4-off toolholders.
Used Harrison M250 Straight Bed Centre Lathe with 280mm swing x 750mm between centres. Spindle bore 35mm. Spindle speeds (9) 40-1500rpm.
Used Alpha 1400XT CNC/Manual Lathe with 400mm swing x 1250mm between centres. Spindle bore 55mm. Equipped with Fanuc X Series Control, 3 jaw chuck, Parat toolpost, interlocked guarding, coolant system, lighting.
HARRISON V800 with swing capacities of 660mm and 810mm respectively. Induction hardened and ground bed. Heavy duty constant power spindle drive motor. Precision hardened and ground gears in headstock. Precision spindle running on Gamet ultra high precision taper roller bearings.
Induction hardened and ground bed. Heavy duty constant power spindle drive motor. Precision hardened and ground gears in headstock. Precision spindle running on Gamet ultra high precision taper roller bearings.
HARRISON V550 280mm (11”) centre lathe with induction hardened bedways, quick change universal gearbox, self contained motor driven by 11kw motor and electrical equipment for 380 or 415/3/50Hz supply. Variable speed drive from 18-1800 rev/min with apron mounted controls. Two axis fast traverse with single lever control from apron.Available in 2000mm and 3000mm lengths with rapid traverse as standard.
HARRISON V460 230mm (9 inch) centre lathe with induction hardened bedways, quick change universal gearbox, self contained motor driven by 11kw motor and electrical equipment for 380 or 415/3/50Hz supply. Variable speed drive from 20-2000 rpm with apron mounted controls. Two axis fast traverse with single lever control from the apron.
HARRISON V390 195mm (7 ½”) Centre Lathe with induction hardened bedways, Quick change universal gearbox, Self contained motor driven by 7.5kw (10hp) motor, Electrical equipment for 380 or 415/3/50Hz supply, Variable speed drive from 14-2500 rev/min with apron control
HARRISON V350 170mm (6.5”) centre lathe with induction hardened bedways, quick change universal gearbox, self contained motor driven by 7.5kw (10hp) motor and electrical equipment for 380 or 415/3/50Hz supply. Variable speed drive from 17-3250 rev/min with apron control.
Geared head centre lathe. Distance between centres 1250mm. Spindle nose D1-6 Camlock. Motor power 5.5kW. Constructed on a cast iron base with removable chip tray. The rigid triangular webbed bed, designed for optimum swarf clearance, is of high grade cast iron, induction hardened and form ground. The Headstock is mounted directly on the bed to ensure correct alignment. The spindle drive gears are solid steel, hardened and ground, lubricated by recirculating oil pumped universal gearbox gives a wide range of Metric & Imperial feeds and threads.