Manual Lathes

Manual Lathes. From the toolroom to machines capable of turning 3500mm diameter by upto 12,000mm between centres. The manual lathe is still one of the most used machines in any workshop. For over 40 years, RK International Machine Tools has enjoyed a relationship with 600UK offering the Colchester and Harrison lathes. For larger capacities, Italian manufacturer COMEV provides exceptional quality machines with spindle bores up to 320mm.

Used Manual Lathes            New Colchester / Harrison Manual Lathes          New EUROPA manual lathes 

Sort by:
Used Harrison M300 Gap Bed Centre Lathe

Harrison M300 Gap Bed Centre, 2008 , Swing over bed 330mm, Spindle bored to pass 38mm diameter, Motor 1500rpm at 50Hz, Machine equipped with 3 & 4 Jaw Chucks, Quick change toolpost and 3-off toolholders, Rear toolpost, Faceplate, Driveplate, Apron dial,chuck guard, Coolant System, Rear Splash Guard.

See product >
Harrison M300 Gap Bed Centre Lathe

330 Swing x 635mm between centres. Spindle bore 38mm. Spindle speeds (16) 40-2500rpm. Equipped with Acu-rite 2 axis DRO system, 3 jaw chuck, quick change toolpost and 1-off toolholder, chuck guard, coolant system, rear splash guard. Ex College Machine.

See product >
Colchester Triumph VS2500 Gap Bed Centre Lathe

Used Colchester Triumph VS2500 short bed lathe in stock. 400mm swing x 650mm between centres. Spindle bore 54mm. Spindle speeds (inf. variable) 15-2500rpm. Equipped with Heidenhain 2 axis DRO system, 3 jaw chuck, Ainjest high speed screwcutting attachment, taper turning attachment, quick change toolpost and 3-off toolholders, lighting, coolant system, rear splashguard.

See product >
Colchester Triumph 2000 Straight Bed Centre Lathe

387mm swing x 1250mm between centres. Spindle bore 54mm. Spindle speeds (16) 25-2000rpm. Equipped with Newall DP7 2 Axis DRO system, 3 jaw chuck, quick change toolpost and 2-off toolholders, taper turning attachment, stationary steady, chuck guard, coolant system, rear splash guard.

See product >
Colchester Mastiff 1400 Gap Bed Centre Lathe

535mm swing x 1500mm between centres. Spindle bore 90mm. Spindle speeds (16) 18-1400rpm. Equipped with 3 & 4 jaw chucks, faceplate, quick change toolpost and 7-off toolholders, stationary steady, chuck guard, rear splashguard, coolant system. NB: Machine refurbished and repainted.

See product >
Harrison M300 Gap Bed Centre Lathe

330mm swing x 635mm between centres. Spindle bore 38mm. Spindle speeds (16) 40-2500rpm. Equipped with Acu-rite 2 axis DRO system, 3 & 4 jaw chucks, chuck guard, coolant system, rear splash guard. Ex College Machine.

See product >
10 items
Call Now 01322 447611