The ARBOGA A3808 pedestal / floor mounted drilling machine features a 35mm drilling capacity with a gearbox spindle drive for increased drilling torque. An adjustable table and drill head can be raised and lowered along with 360° rotation around the drill column.
Both the ARBOGA A2608 pedestal drills and the power-feed version A2608M are gearbox driven for increase drilling torque. Helical and steel gears ensure highest operational efficiency for a more powerful drive mechanism and smooth operation. On the Arboga A2608M model, once the set drill depth is reached, the spindle will automatically return to the starting point. The feed gearbox is fitted with automatic overload protection which intervenes if the drilling pressure is too high.
The ARBOGA A4008 pedestal / floor mounted drilling machine features the largest drilling capacity at 40mm within the range with a gearbox spindle drive for increased drilling torque. An adjustable table and drill head can be raised and lowered along with 360° rotation around the drill column. The A4008M model features automatic drill retract to the starting point once the set drill depth has been reached. The A4008ELM model features a start / stop of the automatic feed via buttons on the feed lever. Hand and automatic tapping are standard.
Machine for education and tertiary establishments. Ideal for lighter duty drilling work, the floor machine has table adjustment and the bench machine has a raise/lower head, using the base as the table. Adjustment by rack/pinion mechanism is standard. Both machines are supplied with a ‘mushroom’ style stop switch for fitting on installation via the standard no-volt/overload release starter.
IBARMIA EKM Belt transmission “medium” bench with intermediate worktable a robust multi purpose drilling machine. Easy to run with low maintenance.
IBARMIA EKl Belt transmission bench and pillar round column, robust multi purpose drilling machines. Easy to run with low maintenance.
IBARMIA EKL Belt transmission pillar version round column robust multi purpose drilling machine. Easy to run with low maintenance.
With drilling capacities of up to 40 and 50mm, the CLAUSING A series column / pedestal drills are capable of handling heavier workpieces with a wide range of drilling and tapping capacities. The Clausing A series Pillar / Pedestal Drill is designed for easy operation with a mechanical clutch for precise automatic feed control that can be activated from the feed crank handle or by the lever on the front of machine head.
Machine for education and tertiary establishments. The MEDDINGS GH25 drill head will rotate 360° around the column and can be raised and lowered independently of the table. Helical gears combined with steel gears against reinforced fibre gears in the main gear box ensure higher operating efficiency, a more powerful drive and smooth operation.
Specification Drilling capacity 30mm Tapping capacity 20mm Distance drill to column 275mm Morse taper MT3 Spindle travel 150mm Spindle diameter 75mm Column diameter 95mm Table size (16mm T slots) 730 x 210mm Cross feed 200mm Longitudinal feed 355mm Spindle nose to table 500mm Spindle speed 150~2500rpm Machine size 1100 x 910 x 2090mm Weight […]