Clausing CL1250H Radial Drills


CLAUSING CL1250H equipped with a separate hydraulic clamping unit, the vertical movement of the arm with a 890mm spindle travel, is co-ordinated by an IC timer. With a single touch of the ‘on’ button, you can have the arm unclamped, moved vertically or stop and automatically clamp. the powerful 5Hp, dual speed spindle performs drilling capacity to 60mm in cast iron, 50mm in steel.


Drilling Capacities
Drilling    In Steel 50mm
                 In Cast Iron 50mm
Tapping  In Steel 40mm
                 In Cast Iron 50mm
Boring     In Steel 110mm
                 In Cast Iron 165mm
Working Area
Column sleeve dia (E) 300mm
Column face to spindle centre
Maximum (D+C) 1250mm
Minimum (D) 360mm
Spindle head travel (C) 890mm
Base surface to spindle end
Maximum (A) 1345mm
Minimum (B) 441mm
Arm vertical travel (A-B) 630mm
Arm rotation (right & left) 180 degrees
Baseplate working surface 1219 x 739mm
Box table dimensions
Length (L) 635mm
Width (K) 520mm
Height (H) 420mm
Base dimensions
Floor area (R x S) 1785 x 785mm
Height (Q) 190mm
Drilling head
Spindle taper 5MT
Spindle stroke 270mm
Quill diameter 80mm
Number of spindle speeds 12
Spindle speeds (rpm) 56-1450
Number of feeds 3
Spindle feed rate (in/rev) 0.06mm/0.10mm/0.20mm
Spindle drive motor 3.8kW
Elevating motor 0.75kW
Clamping motor 0.75kW
Coolant pump motor 0.10kW
Overall measurements & weights
Maximum machine height (F) 2645mm
Base & column height (G) 2080mm
Shipping dimensions (L x W x H) 2060 x 995 x 2240mm
Net weight 2300kg
Shipping weight 2500kg


Features & Standard Equipment

Equipped with independent clamping unit.
Vertical movement of the arm is coordinated by an IC Timer
With a single touch on the push button switch you can have arm unclamped on column and move vertically, or stop clamp automatically.
Easy to operate arm will maintain the same position after shifting.
Gears are cooled and lubricated by an oil pump to minimise gear wear
Friction type disc clutch absorbs impact force caused by vertical movement of spindle and protects all transmission units inside gear box.
Quick spindle return, the clutch will help speed up the tapping operation.
Special automatic tool eject device is supplied to allow you to change tools quickly.  (No drift is required)
Special arm elevating device prevents arm from dropping abruptly after years of usage.
The main spindle is balanced by a compressed spring.
Coolant system
Tool kit and manuals
635 x 520 x 420mm box table



    £ P.O.A
    • Condition : new
    Call Now 01322 447611