Gotha UAL600 Aluminium Sawing Machine is a Single head cutting off machine with automatic raising of the blade. Cutting angles from 10° to 170° and intermediate degrees. Mechanical stop for angles setting +45°/0°/-45°. Complete with movable fence which slides on linear guides to increase the cutting capacity. Vertical pneumatic clamping set which is adjustable along the whole stroke of the table, automatic spray mist lubrication, exhaust attachment.
Europa 3613-V is a heavy duty vertical bandsaw to cut all metals and materials. This has a large throat and variable speed drive through and inverter.
Choose from 500 / 600 or 700 x 2000mm grinding capacities are available on the PERFECT Surface grinder with the latest ADP series of NC surface grinders. Stepless Variable Proportional Valve Hydraulic System on the X axis: allows feed adjustment according to the workpiece type for increased convenience of operation. Y & Z axes driven by AC servo motor and MPG handwheel. Inverter controlled spindle motor with variable speed.
The 3 models in the JBS Series offer capacities from 1275mm to 2025mm long x upto 4mm. High quality power shear range from HM Machinery.
Used Haas TL-1 Tool room lathe with CNC control, quick change tool post, operators manual and a 3 jaw chuck. Great used CNC lathe.
FMB Bandsaws have been made in Italy since 1982 and have a full range of quality bandsaw machines available. FMB Zeus CN Automatic CNC Bandsaw is a numerically controlled bandsaw with many industrial sawing features. This is a quality metal cutting saw fully supported in the UK.
EUROPA Astro V500 Vertical Bandsaw – contour sawing machines for metals. The V500 model has a 508mm throat and can clear 330mm under the guides. Variable blade speed from 15-1500 m/min allows cutting of metals right through to plastics or wood. Industrial vertical bandsaws are very useful machines for any workshop environment.
The next model up from the JHC 18S, this machine has a 255mm wide grinding wheel on this model with a 455mm diameter allows for components to be ground from 1 to 50mm with a standard workrest and 40 to 100mm with a special workrest. The EUROPA Jainnhers grinding wheel spindle runs on hydrostatic bearings with a high-pressure oil film for added precision under heavy loads A servo motor provides control of speeds from 10 to 250rpm and is used for the regulating wheel, which can be adjusted to ideal linear speeds. When the diameter of the regulating wheel changes the same linear speeds can still be maintained so as grind the best quality products
Europa VS660 Gap Bed Centre Lathe with 660mm swing x 1500mm between centres. Equipped with Fagor 2 Axis DRO, 3 jaw chuck. Quick change toolpost and toolholders. Large capacity, heavy duty lathe
Colchester Tornado T8MS with 290 x 540mm Capacity. Spindle bore 65mm. Main spindle speed 0-4000rpm. Sub spindle speed 0-6000rpm. Equipped with Fanuc 18iTB CNC Control. Collet chuck (main spindle) 3 jaw chuck (sub spindle). Magazine barfeed.
Arntz Flott have been making drilling machines since 1854 and produce a modern range of electronic variable speed machines.
DELTA specialises in tangential grinding machines with travelling column and provides the largest range available.
