Description
The 3 models in the JBS Series offer capacities from 1275mm to 2025mm long x upto 4mm. High quality power shear range from HM Machinery.
HM JBS Power Shear range with motorised back gauge from HM Machinery.
Specification | JBS 1250 /3,0 |
Working length | 1275mm |
Sheet dimension | 3mm |
Cutting angle | 2,15 degrees |
Cutting/min | 40 |
Motor | 3,0kW |
Measurement (L x W x H) | 2100 x 2000 x 1500mm |
Weight | 1160kg |
Specification | JBS 1250 /4,0 |
Working length | 1275mm |
Sheet dimension | 4mm |
Cutting angle | 2,15 degrees |
Cutting/min | 40 |
Motor | 4,0kW |
Measurement (L x W x H) | 2100 x 2000 x 1500mm |
Weight | 1380kg |
Specification | JBS 2000 /3,0 |
Working length | 2025mm |
Sheet dimension | 3,00mm |
Cutting angle | 1.38 Degrees |
Cutting/min | 38 |
Motor | 4,0kW |
Measurement (L x W x H) | 2900 x 2000 x 1500mm |
Weight | 1750kg |
Standard Equipment |
Motorised Back-Gauge – 630mm |
Front Cut-Piece Dispenser (for pieces less than 390mm) |
Single/Continuous Cutting Facility |
Low 2.15º(JBS 1250/4) & 1.8º(JBS 2000/3) Blade Angle For Burr Free Cutting |
Up to 40 Cuts/Minute |
2 off 600mm Front Supports |
Basic Flat Squaring Arm |
Cut Piece Counter |
LED Cut-Line Lighting |
Rear Light Guarding |
Portable Foot Control/E-Stop |
Powerful 4Kw Motor |