The Linear Cyclematic range of high precision toolroom lathes are ideal lathes to replace the Hardinge HLV machines. High speed spindles with 5C collet closers and a range of chucks, digital readouts, automatic threading options and workholding. There is also a manual turret available.
330mm swing x 635mm between centres. Spindle bore 38mm. Spindle speeds (16) 40-2500rpm. Equipped with Acu-rite 2 axis DRO system, 3 & 4 jaw chucks, chuck guard, coolant system, rear splash guard. Ex College Machine.
Europa VS660 Gap Bed Centre Lathe with 660mm swing x 1500mm between centres. Equipped with Fagor 2 Axis DRO, 3 jaw chuck. Quick change toolpost and toolholders. Large capacity, heavy duty lathe
COLCHESTER Master with a distance between centres of 650mm. Swing over bed 350mm. Interlocked, saddle mounted chuck guard and full rear splashguard for operator safety. Centralised one shot lubrication of slides and leadscrew. Harrison V350 Centre Lathe has the same level of equipment and can be supplied New from our Kent base.
COLCHESTER Mastiff with 2000mm & 3000mm between centres. 280mm (11”) centre lathe with induction hardened bedways, quick change universal gearbox, self contained motor driven by 11kw motor and electrical equipment for 380 or 415/3/50Hz supply. Variable speed drive from 18-1800 rev/min with apron mounted controls. Two axis fast traverse with single lever control from apron.
COLCHESTER Magnum LS with swing capacities of 660mm and 810mm respectively. Induction hardened and ground bed. Heavy duty contanst power spindle drive motor. Precision hardened and ground gears in headstock. Precision spindle running on Gamet ultra high precision taper roller bearings.
COLCHESTER Magnum VS Heavy duty centre lathes are renowned for quality and reliable turning. Has the strength and standard production features to meet almost any large turning requirement. Available upto 6000mm between centres.
The COLCHESTER Student and HARRISON M300 Manual Lathes are ideal machines for training workshops; secondary and tertiary education. 165mm (6.5”) Centre Lathe with induction hardened bedways, Quick change universal gearbox, Self contained motor driven by 2.2kw (3hp) motor, Electrical equipment for 415/3/50Hz supply, spindle speed 40-2500 rpm
330mm swing x 635mm between centres. Spindle bore 38mm. Spindle speeds (16) 40-2500rpm. Equipped with Acu-rite 2 axis DRO system, 3 & 4 jaw chucks and 1-off toolholder, chuck guard, coolant system, rear splash guard. Ex College Machine.
Swing 330mm. Distance between centres 635mm. Equipped with 3 jaw chuck, quick change toolpost, single position & turret bedstop.
Distance between centres 760mm. Spindle bore 54mm. Equipped with Prototrak SLX Control, 3 jaw chuck, quick change toolpost, tailstock, coolant tank and pump.
330 Swing x 635mm between centres. Spindle bore 38mm. Spindle speeds (16) 40-2500rpm. Equipped with Acu-rite 2 axis DRO system, 3 & 4 jaw chucks, quick change toolpost and 1-off toolholder, chuck guard, coolant system, rear splash guard. Ex College Machine.
Call Now 01322 447611