Description
Harrison M300 Gap Bed Centre, 2008 , Swing over bed 330mm, Spindle bored to pass 38mm diameter, Motor 1500rpm at 50Hz, Machine equipped with 3 & 4 Jaw Chucks, Quick change toolpost and 3-off toolholders, Rear toolpost, Faceplate, Driveplate, Apron dial,chuck guard, Coolant System, Rear Splash Guard.
Machine specification | |
Centres | |
Height | 167mm |
Admits between | 635mm |
Swing | |
Over bed | 330mm |
Over cross slide | 210mm |
In gap diameter | 480mm |
Length | 115mm |
Spindle | |
Bored to pass | 38mm diameter |
Nose | No. 4 D1 Camlock |
Speeds | |
Number | 16 |
Range | 40 to 2500rpm |
Motor | |
1500rpm at 50Hz | 2.2kW |
Cross Slide | |
Width | 140mm |
Travel | 190mm |
Top Slide | |
Width | 82mm |
Travel | 92mm |
Tailstock | |
Quill – diameter | 42mm |
– travel | 110mm |
– morse taper | No. 3 |
Set over | +/-12mm |
Approx weight | 635kg |
Machine in Metric execution |
Machine equipped with |
3 Jaw chucks |
Quick change toolpost and 3-off toolholders
Rear toolpost Faceplate Driveplate Apron dial |
Chuck guard |
Coolant system |
Rear splashguard |