Description
Used Colchester Tornado a50 cNC Lathe, YOM-2002, SN-T50413, Maximum swing over covers-410mm, Maximum turned diameter-170mm, X axis travel-170mm, Z axis travel (max. turned length)-350mm, Fanuc 21i-T CNC Control system, Hydraulic collet chuck and assorted collets, hydraulic 3 jaw chuck 170mm diameter, Hydraulic tailstock, Parts catcher, Swarf Conveyor, MBF 1000 VDI toolholders, Coolant system, Lighting, Interlock guarding.
| MACHINE SPECIFICATION | |
| Maximum swing over covers | 410mm |
| Maximum turned diameter | 170mm |
| X axis travel | 170mm |
| Z axis travel (max. turned length) | 350mm |
| Carriage inclination | 60° (slant bed) |
| Spindle centre height (from floor) | 900mm |
| Spindle nose | A2-5 |
| Hole through spindle | 54mm |
| Max. drawtube (bar) capacity | 42mm |
| Maximum spindle speed | 4000rpm |
| Spindle motor | 5-5kW |
| X axis slideway configuration | Linear guideway |
| X axis motor | 2 Nm |
| X axis rapid traverse rate | 10m/min |
| X axis ballscrew (diameter x pitch) | 25mm x 4mm |
| Z axis slideway configuration | Linear rails |
| Z axis motor | 3 Nm |
| Z axis rapid traverse rate | 15m/min |
| Z axis ballscrew (diameter x pitch) | 32mm x 10mm |
| Turret disc diameter | 340mm |
| Turret tooling type | VDI 30 |
| Turret stations | 12 |
| Turning tool shank dimensions | 20 x 20mm |
| Maximum boring bar diameter | 32mm |
| Slideway lubrication system | Grease |
| Coolant tank capacity | 100 litres |
| Approximate net weight | 2415 Kg |
| Machine Equipped with | |
| Fanuc 21i-T CNC Control System | |
| Hydraulic collet chuck and assorted collets | |
| Hydraulic 3 jaw chuck 170mm diameter | |
| Hydraulic tailstock | |
| Parts catcher | |
| Swarf conveyor | |
| MBF 1000 magazine barfeed | |
| Assorted VDI toolholders | |
| Coolant system | |
| Lighting | |
| Interlocked guarding |
