The popular JHC 18S provides grinding capacities from 1 to 50mm with a standard workrest or 40 – 100mm with a special workrest. As with other ‘S’ models, the regulating wheel is controlled by a servo motor resulting in variable speed from 10 – 250rpm.
The performance of all the EUROPA Jainnher machines is strictly inspected for roundness, straightness and surface roughness on standard work pieces. Hydrostatic bearings. Semi hydraulic float bearings. Regulating wheel drive. Spindle oil circulation. Slide device. Wheel dressing device.

With an increased wheel size over the JHC 18S, this machine has a 305mm wide grinding wheel on this model with a 455mm diameter allows for components to be ground from 1 to 50mm with a standard workrest and 40 to 100mm with a special workrest.
The advantages of centreless grinding, are not just for high volume production. Centreless grinding provides a fast turnaround for rounding of stock material and quite often, suits lower production runs. Tight tolerances easily achievable. All spindles fitted with precision ground Hydrostatic Bearings with a high pressure oil film for added precision under heavy
loads.

The next model up from the JHC 18S, this machine has a 255mm wide grinding wheel on this model with a 455mm diameter allows for components to be ground from 1 to 50mm with a standard workrest and 40 to 100mm with a special workrest. The EUROPA Jainnhers grinding wheel spindle runs on hydrostatic bearings with a high-pressure oil film for added precision under heavy loads A servo motor provides control of speeds from 10 to 250rpm and is used for the regulating wheel, which can be adjusted to ideal linear speeds. When the diameter of the regulating wheel changes the same linear speeds can still be maintained so as grind the best quality products

With a capacity from 1 to 25mm with a standard workrest or 25 to 40mm with a special workrest, and a servo controlled regulating wheel, the JHC 12S is the most compact centreless grinder in the range.
A precision ground, the hydrostatic bearing assembly provides minimal friction and lateral displacement, along with extended wheel life under heavy grinding loads. The grinding wheel spindle runs on the hydrostatic bearings with an ultra-thin oil film between all touching surfaces. This provides a substantial reduction in wear and prolongs spindle trueness and longevity. The regulating wheel uses a Variable Speed Motor, controls the speed of the regulating wheel.

EUROPA 8UM Universal Milling Machine with universal Bi-rotative head. Combining the features of universal, vertical and horizontal milling machines, the universal compound swivel head gives the advantage of being both suitable for conventional milling operations as well as handling more complex operations such as milling awkward to reach cavities.

EUROPA Universal Milling with Vertical and Horizontal spindles, & bi-rotative universal milling head. Combining the features of universal, vertical and horizontal milling machines, the universal compound swivel head gives the advantage of being both suitable for conventional milling operations as well as handling more complex operations such as milling awkward to reach cavities.

A highly rigid milling machine perfectly suited for horizontal and vertical milling operations. Compact construction. 6-step speed on horizontal spindle 60Hz 81~1470rpm. 240 x 1055mm table surface.

The simple and affordable way to clean your coolant on multiple machines. The ECO-4 Oil Seprator is a mobile device designed for cleaning your coolant. WE all know that COOLANT in the manufacturing and production process will inevitably become contaminated with dirt oil, grease and particles of machine materials. This will lead to the valuable […]

The DELTA Rotax series Compact Plus NC Control is a high precision fully automatic rotary table horizontal spindle NC grinding machine with hydrostatic ways on all axes. It is suitable for both mass production and one-off single piece precision surface grinding applications.

Rotary table horizontal spindle grinding machine with travelling column and hydrostatic ways. Travelling column with stabilised Meehanite cast iron structure, maximum rigidity. Hydrostatic support on all machine axles with full grip slideways. User friendly automation levels.

Travelling column with stabilised Meehanite cast iron structure. All the machine axes feature full grip hydrostatic slideways along the entire travel. The spindle line has a Mackensen hydrodynamic bearing on the front and a pair of pre-loaded precision ball bearings on the rear. DELTA MAXI Series travelling column grinding machines are available in 9 models with grindable surfaces from 1200 x 750mm to 3000 x 1100mm with 2 different levels of automation: – NC or CNC.

Vertical axis grinding machines with fixed, rotary and swinging table available in 5 models. Exceptional material removal rates. Quick, vertical feed via handwheel. Fine feed with micrometre feed