Description
The KINGSLAND 50P is developed for maximum production purposes and efficiency. Wide applications – for large hole punching, crimping, tube notching, bar bending, sheet bending, punch press applications. Interchangeable bearings, seals and valves readily available.
Specification |
Kingsland 50P Punch |
| Capacities based on material strength of 450N/mm2 | |
| Punching | |
| Rated capacity | 50 ton |
| Maximum capacities | 24 x 15mm |
| Diameter x thickness | 36 x 10mm |
| Maximum stroke length | 60mm |
| Speed – 20mm travel | 22 full cycles |
| Throat depth | 280mm |
| Largest hole | 38mm diameter (standard) |
| 110mm diameter (optional) | |
| Working height | 1070mm |
| Motor | 3.0kw |
| Nett weight | 600kg |
| Gross weight | 680kg |
| Machine dimensions (length x width x height) | 1060 x 570x 1760 |
| Additional Tooling (optional) | |
| Bending | |
| Maximum bar size | 150 x 12mm |
| Sheet | 300 x 3mm |
| Notching | |
| Material thickness | 6mm |
| Width (rectangle) | 35mm |
| Depth (rectangle) | 75mm |
| Corner notch | 150 x 3mm |
| Tube: maximum diameter | 83mm |
Kingsland 50P Punch
Standard Equipment |
| One set Round Punch and Die 22 mm dia |
| Easy Change Punch Holder, Retaining Ring and Adaptors |
| Swing away Punch Stripper Unit |
| Universal Die Bolster for punching of flats, angle and flanges of Channel and I Beam |
| Punch Table with guides |
| Shielded Foot Pedal |
| Power Inching and Adjustable Stroke |
| Automatic Overload Relief on Hydraulic System |
| 3. kW electric I.P. 55 Class `F’ T.E.F.C. Tropicalised Motor |
| Starter, Isolator and Inch Switch Controls |
| Low Volt Electrical Control Circuit |
| Service Tool Kit |
| Maintenance/Instruction Manual |
| Full Tank Hydraulic Fluid |
| Machine painted: light grey, dark grey and yellow |
Kingsland 50P Punch
Price:
£ P.O.A
Details:
- Condition : new
