Linear Cyclematic Model CTL618E High Precision Toolroom Centre Lathe


Good for pitch and module turning processing without any gears in gearbox. Easy exchange of inch and metric system, accuracy goes up to three digits after decirmal point.


With Chuck 150mm
With Expanding Collets 76mm
With Round 5C Collets 27mm
With Hexagon 5C Collets 22mm
With Square 5C Collets 19mm
With Step Chucks 27 ~ 152mm
Spindle Nose Diameter Ø55.5mm
Spindle Nose I.D/O.D 5C (10°) / 4° Taper
Spindle Speeds (Variable) 50-4,000rpm (5C) / 50-3,000rpm
(with 150mm 3- jaw chuck)
Inverter Spindle Motor 3 HP
Hole Through Spindle 31.75mm
Bar stock diameter (5C collet) Ø27mm
Distance Between Centers 457mm
Swing Over Bed 280mm
Swing Over Carriage 230mm
Swing Over Cross Slide 152mm
Carriage Power Feed Range (Variable) 8~178mm
Cross Slide Power Feed Range (Variable) 5~102mm
Cross Slide Travel 152mm
Quick-action Compound Slide Travel 2.5mm
Compound Slide Travel 76mm
Tailstock spindle diameter Ø34.5mm
Tailstock spindle taper MT #2
Tailstock spindle travel 95mm
Coolant pump 1/8HP  / 220V / 3PH
Feed inverter 1/2HP
Range of Threads 0.275~2.7mm (11~108 TPI)
Main motor 3 HP, 400V      or       220v 1PH
AC feed motor 220V
Net/Gross weight 1100 / 1200 kgs
Machine packing dimension 2000 × 850 × 1900mm



Electrical Requirement 440 volts - 3 phase - 50 cycles
Cyclematic CTL-618e Toolroom lathe without gear box but with CPU for threading
Colour: white/grey or Special Paint Finish
7" Colour Delta touch screen
English / Metric dual reading dials
3HP YASKAWA inverter
3HP frequency motor
Tailstock with No.2 Morse Taper
Work light
Coolant pump
Tool Box with following items:

Hexagon Allen Keys: 1.5, 2, 2.5, 3, 4, 5, 6, 8mm, Screwdriver, Combination Wrench 10mm, Double open wrench (8-10, 12-14, 11-13, 17-19mm) Adjustable wrench 200mm, Oilcan, Spare paint, Fuse x 5, Instruction Manual

    £ P.O.A
    • Condition : new
    Call Now 01322 447611