Entry level machines that give high accuracy results and most engineers can be trained to begin sparking in less than an hour. The generator can be set with a minimal input of 4 parameters. There is also the option for Z axis power stepping and up to 50 different programs can be stored. Fuzzy logic control system automatically monitors machining conditions and adjusts to keep cutting at optimum.
With Programmable Z Axis & Fuzzy Logic Control
|Internal tank dimensions||830 x 500 x 300mm|
|Worktable size||600 x 300mm|
|Travel X & Y||300 x 200mm|
|Work head travel (manual)||200mm|
|Distance ram platen to worktable||195 - 590mm|
|Maximum electrode weight||60 Kgs|
|Maximum workpiece weight||550 Kgs|
|Machine weight||1050 Kgs|
|Outside dimensions||1530 x 1590 x 1955mm|
|Maximum output current||50 amps|
|Best surface finish||0.2 RA|
|Maximum metal removal rate||390mm3/min|
|Minimum electrode wear||0.2%|
|Total power input||4.5 KVA|
|Net weight||180 Kgs|
|Note Dielectric oil is not supplied with the machine|
- Reference mark
- Distance to go display
- 2 datum's
- Centre line probe function
- 5 switching outputs for the programming the Z axis
- Fire extinguisher
- Arc detect with auto shut down
- Preset safety retract
- Dielectric protection circuits
- Fire extinguisher (Purchasers will be responsible for ensuring that this equipment is maintained in accordance with the manufacturers instructions)
- Paper filters 1 set
- Tool box 1 p.c.
- Flushing nozzles 1 set
- Drill chuck 1 p.c.
- Clamping kit 1 set
- Electrode holder 1 p.c.
- Halogen work lamp 1 p.c.
- Levelling pads 1 set
- 3 Axes DRO 1 p.c.
- Condition : new