Description
EUROPA bed type mill is inverter driven, infinitely variable spindle speeds, Heavy duty 1200mm wide saddle. 1000kg table load. A milling machine capable of handling the harshest of toolroom environments.
Specification |
|
Table size | 1370 x 250mm |
Longitudinal traverse | 775mm |
Cross traverse | 445mm |
Vertical traverse | 500mm |
Maximum table load | 800 kg |
Quill travel | 125mm |
Quill feeds | 0.04, 0.08, 0.15mm/rev |
Quill diameter | 105mm |
Quill taper | ISO 40 |
Spindle motor | 3.75 kw |
Spindle speeds (inf. variable) | 55-3450 rpm |
Spindle nose to table | 90-580mm |
Spindle centre line to column | 440mm |
Longitudinal Power feed inverter | 0.75kw |
Overall height | 2280mm |
Overall depth | 1500mm |
Overall width | 1815mm |
Width of Y axis slideways | 420mm |
Head tilt left or right | 0-90 degrees |
Weight | 1700 kg |
Machine in metric execution |
Standard Equipment |
5HP brake motor W/- 5HP inverter 415V 3ph 50Hz |
X/Y/Z 1/2HP brake motors |
X/Y W/- HTD belt drive assembly |
H.D. Head 4.13” 105mm quill, 5” 127mm stroke |
Z Manual brake |
Quill feed dial indicator |
Electromagnetic brake on spindle motor |
CP4 ABEC7 Angular contact spindle bearing |
C7 double nut X/Y/Z ballscrews |
Turcite “B” On saddle X/Y ways |
Table hardened and ground, T slots ground |
4 Handwheels W/- clutch lever |
Electric box / lockable main switch |
Over arm for control panel |
Short arm halogen work light |
Auto lube W/- alarm |
Coolant system/pump |
Heavy duty swarf tray |
Stainless steel front, rubber rear, Y way covers |
Z axis concertina way covers |
Genuine meehanite castings |
Y/Z square ways hardened/ground |
Tools and tool box, parts list |
Operation manual, test and accuracy chart |
CE/EMC Equipment including:- Quill guard/cut-out switch, EMC filter CE approved contactors |
Heavy duty back guard |
Quill guard w/-cut-out switch and CSA on/off only |
Air balance drawbar CE |
Price:
£ P.O.A
Details:
- Condition : new