Description
With a standard work capacity from 1mm to 50mm with a standard work rest, and 40mm to 100mm with a special workrest. A servo motor provides control of speeds from 10 to 250rpm and is used for the regulating wheel, which can be adjusted to ideal linear speeds. When the diameter of the regulating wheel changes the same linear speeds can still be maintained so as grind the best quality products
Hydrostatic Bearings: Precision ground Hydrostatic Bearings: Substantial decrease in heat deformation associated with Hydrodynamic bearings.Minimal friction, lateral displacement, and pressure .Extended tool life under heavy cut loads.
Grinding Wheel Spindle: The Grinding Wheel Spindle runs on hydrostatic bearings with a high-pressure oil film for added precision under heavy loads. Substantially reduces wear while prolonging spindle trueness. SNCM-210H carbon steel hardened beyond HRC60, yielding high torsion resistance.
Specification |
|
Standard work rest (diameter) | 1 - 50mm |
Special work rest (diameter) | 40 – 100mm |
Grinding wheel size (dia x width x bore) | 510 x 205 x 254mm |
Regulating wheel size (dia x width x bore) | 305 x 205 x 127mm |
Grinding wheel speed | 1350rpm |
Regulating wheel speed | 10-250rpm variable speed |
Grinding wheel motor | 20HP |
Regulating wheel motor | 4HP Servo Motor |
Hydraulic pump motor | 1HP |
Coolant pump motor | 1/2HP |
Regulating wheel feed on handwheel | 3.5mm/rev - 0.05mm (Gra) |
Regulating micro feed on handwheel | 0.1mm/rev - 0.001mm (Gra) |
Table feed on handwheel | 9mm (rev) - 0.05mm (Gra) |
Table micro feed on handwheel | 0.2mm (rev) - 0.001mm (Gra) |
Dressing handwheel | 2mm/rev - 0.01mm (Gra) |
Regulating wheel tilt angle | +5 Degrees ~ -3 Degrees |
Regulating wheel swivel angle | ±5 Degrees |
Approx weight | 3200kgs / 3500kgs |
Floor space (L x W x H) | 2400 x 1300 x 1550mm |
Standard Equipment |
Hydraulic wheel dressing of the grinding and control wheels |
Grinding wheel and grinding wheel flange |
Regulating wheel and regulating wheel flange |
Flange extractor |
Diamond tool |
Thrufeed workrest and blade |
Infeed workrest and blade |
Levelling screw and plate |
Tool box and tools |
Instruction and maintenance manual |