Description
The COLCHESTER Triumph is renowned worldwide for quality and reliability. Built to withstand rugged, heavy duty use, our lathes give years of outstanding service with the absolute minimum of maintenance. At the same time, all Colchester manual lathes are capable of very fine precision turning. With a 1250mm distance between centres. Solid structure and uncompromising build quality.
Specification |
Colchester Triumph Lathes |
Height of centres | 195mm |
Bed length, between centres | 1250mm |
Swing over bed | 400mm |
Swing over cross slide | 246mm |
Swing in gap | 585mm |
Width in front of faceplate | 165mm |
Spindle bore | 54mm |
Spindle nsoe mounting | D1-6 mounting |
Morse taper in nose bush | No. 4 MT |
Spindle speeds : number | 3 |
Spindle speeds : ranges rpm | 14-275, 40-795, 125-2500 |
Variable spindle speed max | 2500rpm |
Nominal motor power | 7.5kW (10HP) |
Range of sliding feed per spindle rev | 0.018-1.2mm/rev: 0.0007-0.048in/rev |
Number of English pitches | 56 |
Range of English pitches | 2-56 tpi |
Number of diametral pitches | 20 |
Range of diametral pitches | 8 - 56 |
Number of metric pitches | 51 |
Range of metric pitches | 0.2 - 14mm |
Number of module pitches | 20 |
Range of module pitches | 0.2-3.5 |
Width over bedways | 318mm |
Travel of cross slide | 250mm |
Travel of topslide | 130mm |
Total travel of tailstock barrel | 155mm |
Taper in tailstock barrel | No. 5 MT |
Machine weight | 1800kg |
Colchester Triumph Lathes. We stock Triumph VS2500 new and used
Machine equipped with:- |
2 Axis digital readout with CSS & slideable display along full length of bed |
3 Jaw chuck - 250mm dia |
Quick change toolpost with :- 4 standard, 1 Vee and 1 MT toolholder |
Accuracy chart |
Covered leadscrew |
Machine worklight |
Electric coolant pump, tank and fittings |
Instruction and spare parts manual |
Interlocked chuck guard |
Machine toolkit |
Integral chip guard which can be positioned along full length of bed |
Integrated splash guard |
Thread dial indicator |
Wheeled swarf bin |
Right hand aprons are standard on metric machines |
Left hand aprons are standard on imperial machines |
Colchester Triumph Lathes - New VS2500 lathes in Kent. If you need another option, high spec and uk stocked, try the EUROPA eturn range below;