Harrison Alpha 330 Plus Centre Lathe


Harrison Alpha 330 Plus CNC Flat Bed Lathe. This lathe has a 330mm swing with 1000mm between centres, comes with a Dorian 8 station manual turret, 3 jaw chuck, chuck guard and a drawbar collet chuck with collets.

Harrison Alpha 330 Plus Centre Lathe - Flat bed cnc lathe


Harrison Alpha 330 Plus
Height of centres 167mm
Distance between centres 1000mm
Swing over bed 330mm
Swing over cross slide 210mm
Spindle bored to pass 40mm
Spindle nose Camlock D1-4”
Taper in nose bush No. 3MT
Spindle speeds 2 infinitely variable ranges
Low speeds 0-2000 rpm
High range 0-3500 rpm
Tailstock quill travel 110mm
Tailstock quill diameter 42mm
Tailstock quill taper No. 3MT
Constant power – range 1 1000 to 3500
Constant power – range 2 580 to 2000
Cross slide (x axis) ballscrew diameter 16mm
Cross slide thrust 1.9KN
Longitudinal (z axis) ballscrew diameter 25mm
Overall feedrates (12 metric or 12 imperial)
including feedrate override facility (+/- 50%)
Metric cross and longitudinal range infinite selection 0.003 to 0.6mm/rev
Imperial cross & longitudinal range infinite selection 0.001 to 0.024”/rev
Rapid power traverse rate (x axis) 1.5m/min
Rapid power traverse rate (z axis) 3m/min
All threads metric pitches to 14.0mm
Imperial pitches to 2 TPI
Module pitches To 3.5 MOD
Dimetral pitches To 8 DP
Power supply requirement 21 KVA
Main motor 7.5kW

Machine dimensions

Length 2050mm
Width 1200mm
Height 1550mm
Approximate weight 1050kg


Machine Equipped with

3 Jaw chuck
Drawbar collet attachment and set of collets
Dorian manual 8 station turret and assorted toolholders
Coolant system
Chuck guard



Other Harrison Lathes in stock:

Harrison Alpha 460Plus Gap Bed Centre Lathe


    £ P.O.A
    • Serial Number : P20269
    • Year : 1999
    • Condition : used
    Call Now 01322 447611