Description
Less than 940 cutting hours… 500 x 400 x 330mm XYZ travels with 24000rpm BBT30 spindle
| Specification | |
| Traverses | |
| X Axis | 500mm |
| Y Axis | 400mm |
| Z Axis | 330mm |
| Spindle Nose to Worktable | |
| Minimum | 250mm |
| Maximum | 580mm |
| Work Table | |
| Table working surface | 650 x 400mm |
| Table loading capacity (uniform load) | 300kg |
| Machine Dimensions | |
| Width | 1615mm |
| Depth | 2040mm |
| Weight (approximately) | 2100kg |
| Spindle | |
| Maximum speed | 24,000rpm |
| Taper | BBT30 |
| Feedrates | |
| Rapid traverse rate | 54m/min |
| Acceleration X/Y/Z | 1.6/1.2/1.6G |
| Feedrate | 1 – 30,000mm/min |
| Toolchanger | |
| Tool storage capacity | 21 Tools |
| Tool change time – cut to cut | 1.6 secs (2kg) |
| CNC Control System | Fanuc Series 31i-B5 |
| Lubrication System | Intermittent Central Lubrication |
| Electrical Supply | 415V, 3 ph , 50Hz |
| Compressed Air Supply | 5kgf/cm2 (100 litres/min) |
Machine equipped with:-
- Sub table
- Coolant system
- Lighting
- Enclosed guarding
