Description
Colchester Triumph 2000 x 1250mm gap bed cantre lathe. Manufactured in 1986, this lathe is very well equipped and includes a 2 axis DRO, 3 & 4 Jaw chucks, faceplates plus much more.
Used Colchester Triumph 2000 Gap Bed Centre lathe x 1250mm between centres (1986)
| Machine Specification | |
| Centre height | 190mm |
| Distance between centres | 1250mm |
| Swing over bed | 387mm |
| Swing over cross slide | 241mm |
| Swing in gap | 584mm |
| Width of gap in front of faceplate | 240mm |
| Spindle bore (max. Bar dia) | 54mm |
| Spindle nose mounting | D1-6 Camlock |
| Taper in spindle nose bush & tailstock barrel | No. 4 Morse |
| Width of bedways | 279mm |
| Total travel of cross slide | 235mm |
| Total travel of top slide | 120mm |
| Total travel of tailstock barrel | 155mm |
| Spindle speeds (16) | 25-2000rpm |
| Drive vee belt and clutches | |
| Spindle motor | 5.6kW |
| Whitworth threads (45) | 2 – 72 tpi |
| Diametral threads (21) | 8 – 44 DP |
| Metric pitches (39) | 0.2 – 14mm |
| Module pitches (18) | 0.3 – 3.5 mod |
| Sliding feeds, per rev. of spindle | 0.0015 – 0.040” |
| Surfacing feeds, per rev. of spindle | 0.00075 – 0.020” |
| Machine in Imperial execution | |
Very well equipped, used Colchester Triumph 2000 Gap Bed Centre lathe x 1250mm between centres (1986)
| MACHINE EQUIPPED WITH |
| 2-axis DRO system |
| 3 & 4 Jaw chucks |
| Large and small faceplates |
| Quick change tool post and 5 off toolholders |
| Travelling steady |
| Drill chuck |
| Rotating centre |
| Apron dial |
| 5 position bedstop |
| Single bedstop |
| Chuck guard |
| Coolant System |
| Rear splashguard |
Have you seen the new version of this lathe? >>> Click to see more on the New Colchester Triumph VS2500
Price:
£ P.O.A
Details:
- Serial Number : 6/0044/34522
- Year : 1986
- Condition : used
Videos:
