Serial: TBC
Lathes, CNC & Manual
New
Harrison
£ P.O.A
Enter your email address to continue:
Harrison Model V390 Centre Lathe
Photos
Description
Features
Alternatives
Video
Accessories
MACHINE SPECIFICATION | |
| Height of centres | 195mm |
| Distance between centre | 650mm or 1250mm |
| Swing over bed | 400mm |
| Swing in gap | 585mm |
| Gap width from faceplate | 165mm |
| Swing over cross slide | 246mm |
| Spindle bored to pass | 54mm |
| Spindle nose | Camlock D1-6 |
| Taper in nose bush | No. 4 MT |
| Spindle speeds | 3 Infinitely variable ranges |
| Speed range | 14 to 275rpm, 40 to 795rpm, 125 to 2500rpm |
| Main motor | 7.5kW |
| Leadscrew diameter | 32mm |
| Leadscrew pitch metric | 6mm |
| Leadscrew pitch imperial | 4 TPI |
| Number of feedrates (Metric) | 42 |
| Longitudinal feedrates (Metric) | 0.036 to 2.4mm/rev |
| Radial feedrates (Metric) | 0.018 to 1.2mm/rev |
| Number of feedrates (Imperial) | 42 |
| Longitudinal feedrates (Imperial) | 0.0014 to 0.096”/rev |
| Radial feedrates (Metric) | 0.0007 to 0.048”/rev |
| Number of threads std (Metric) | 51 metric threads 0.2 to 14.0mm |
| Number of threads std (Imperial) | 56 english pitches. 2 to 56 TPI |
| Number of threads std (Diametral) | 20 diametral pitches 56 to 8 D.P. |
| Number of threads std (Module) | 20 module pitches 0.2 to 3.5 MOD |
| Width over bedways | 318mm |
| Width of cross slide | 180mm |
| Cross slide travel | 250mm |
| Width of topslide | 100mm |
| Topslide travel | 100mm |
| Tailstock quill diameter | 63mm |
| Tailstock quill travel | 145mm |
| Tailstock quill taper | No.5 MT |
| Standard electrics | 380-415V/3ph/50 or 60Hz |
Standard Equipment |
| Electrically interlocked chuck guard |
| Fixed stainless steel leadscrew cover |
| Full-length rear splashguard |
| Graduated tailstock handwheel dial |
| Instruction and spare parts manual. Accuracy chart |
| Thread indicator dial (imperial or metric) |
| Electric coolant pump, Tank, hose, and fittings |
| 250mm (10”) diameter 3 jaw geared scroll, super precision, self centering chuck |
| 315mm (12”) diameter 4 jaw independent chuck |
| Quick change toolpost with 4 standard, l vee and 1 morse taper |
| Digital readout 2 axis with CSS |
| Machine toolbox comprising:Shear pin (2-off), centre bush, No. 4MT centre, No. 5 MT Centre, 13mm combination spanner, 17mm x 19mm spanner, 22mm x 24mm spanner, 32mm x 36mm open ended spanner, 24mm x 27mm box spanner, 3/8” hex. Wrench, set of metric wrenches |
To the best of our knowledge the content of this Website are correct, however illustrations, specifications and prices are not binding in detail.