Serial: TBC
Hot Metal Working Equipment
New
Flamefast
£ P.O.A
Download PDF
Enter your email address to continue:
The DS430S is a combined Ceramic Chip Forge and Brazing Hearth with fail safe controls. It is based on well proven Flamefast technology and is especially useful where space limitations are a consideration. The unit consists of a ceramic chip forge and a single brazing hearth usually equipped with a Flamefast RF80 brazing torch. The unit can be run on either Natural Gas or LPG bottled gas.
Photos
Description
Features
Alternatives
Video
Accessories
| Dimensions: Height | 1080mm, 1800 including Varivac extraction |
| Width & Depth | 1040mm & 550mm |
| | |
| The DS430S is a combined Ceramic Chip Forge and Brazing Hearth with fail safe controls. It is based on well proven Flamefast technology and is especially useful where space limitations are a consideration. The unit consists of a ceramic chip forge and a single brazing hearth usually equipped with a Flamefast RF80 brazing torch. The unit can be run on either Natural Gas or LPG bottled gas. |
| The forge has a single phase whisper quiet integral fan to provide the air supply and takes only 15 minutes to reach working temperature. It can reach a temperature of 1,500oC. It has a 340mm diameter working area and can work upto 50mm steel bar. The ceramic chip technology minimises surface scale formation. |
| The brazing hearth has an area of 0.23 square metres with a heavy duty refractory base. The RF80 brazing torch, which delivers upto 80,000BTU of heat output, can be replaced by a Flamefast RF10 jewellery torch for fine work. All Flamefast RF torches have a single hand wheel control to give ease of flame control and a constant flame pattern over the range of flame sizes. The torches are ignited electronically. |
| Standard Equipment |
| Push button no-volt release starter. Requires manual restart after power failure |
| Ceramic hearth |
| Automatic safety check of controls and air fan |
| Full manual control of hearth conditions |
| Whisper quiet air blower fan |
| Indicator status lights |
| Gas non return valve |
| 12.5kg of ceramic chippings |
| Operation/instruction manual |
| Side and rear heat shields |
| Rake iron |
| 1 asbestos free heat resistant refractory hearth |
| 2 full size heat reflective blocks |
| 4 half size heat reflective blocks |
| Push button no volt release starter. Requires manual restart after power failure. |
| 1 RF 80 brazing torch |
| Colour coded reinforced gas and air hoses |
| Whisper quiet air blower fan |
| Push button electronic ignition |
| Auto gas leak proving system on start up |
| Indicator status lights |
| Gas non return valve |
| Operation/Instruction manual |
To the best of our knowledge the content of this Website are correct, however illustrations, specifications and prices are not binding in detail.