Serial:
Vertical
New
Fanuc
£ P.O.A
Download PDF
Enter your email address to continue:
Fanuc RoboDrill (Mini Mill) Model Alpha-T21iFL
Photos
Description
Features
Alternatives
Video
Accessories
| Specification | |
| Capacity | |
| X axis travel | 700mm |
| Y axis travel | 400mm |
| Z axis travel | 330mm |
| Maximum tool length | 2500mm |
| Table: | |
| Working space (x-axis x Y axis) | 850 x 410mm |
| Capacity of workpiece mass | 300kg (uniform load) |
| Distance from table surface to spindle gauge plane | 250 to 580mm (larger options available) |
| Working surface configuration | 3T-slots, size 14mm pitch 125mm |
| Spindle | |
| Speed range | 100-10,000 / 24,000 min-1 |
| Spindle gauge (call number) | 7/24 taper No. 30 (with air blow) |
| Feedrate | |
| Rapid traverse rate | 54m/min (X,Y,Z) |
| Feedrate | 1 to 30,000 mm/min |
| Turret | |
| Tool change system | SK30 DIN 69871 A orJIS B 6339-1998 BT30MAS 403-1982 P30T-1 (45o) (with BT - BTT is Standard) |
| Tool storage capacity | 21 Tools |
| Method of tool selection | Random shortest path |
| Maximum tool mass | 2kg/tool (total mass: 22kg/3kg/tool (t0tal mass: 33kg) |
| Tool changing time (cut to cut) | 1,6 sec (when 2kg/tool is specified) |
| Motors | |
| Spindle drive motor | 5,5kW/3,7kW |
| Accuracy | |
| Spindle direction positioning accuracy | 0,006/300mm |
| Position repeatability +- | 0,002 |
| Machine Equipped with |
| Centre through coolant |
| DIN tooling (DIN 69871-A30) |
| Double contact tooling BBT |
| High column 0/200/300mm |
| High speed spindle 24,000min-1 |
| Signal lamp (3 lamps) |
| Splashguard wide opening door 1100mm |
| Automatic front doo |
| Automatic side door |
| Basic top cover |
| Full closed top cover |
| Coolant unit (100l/200l) |
| Coolant unit with chip flush (100l/200l) |
| Cleaning unit for tool taper shank |
| Air blow for chips |
| Tool pot cover |
| 16 additional I/O |
| Multi language display |
| Compensation of thermal displacement (XYZ axis) |
| Background editing |
| Extended part program editing |
| Coordinate system selection (G92) |
| Workpiece coordinate system (G52-G59) |
| Addition of workpiece coordinate system 48 pairs (G54.1) |
| Return to reference point (G28) |
| Playback |
| Quick editor |
| Setup file |
| Production control counter |
| Parameter back up function |
| Tool compensation memory C, D/H code, tool geometry/wear |
| Rigid tapping M29 |
| Retraction for rigid tapping |
| Sub program call (M98(M198/M99) |
| Custom macro B (G65, G66/G67) |
| Canned cycles for drilling (G73, 74, 76, 81-G89/G80) |
| Coordinate system rotation (G68/69) |
| Circular interpolation by R programming |
| Al contour control l G05.1 |
| Helical interpolation |
| Skip function (G31) |
| Multi step skip (G31 P1-4) |
| Stroke limit check before move |
| Stored stroke check 1 |
| Stored stroke check 2 (G22/G23) |
| Custom PMC |
| Real time custom macro |
| Manual Guide i |
To the best of our knowledge the content of this Website are correct, however illustrations, specifications and prices are not binding in detail.