Serial: TBC
Vertical
New
Bridgeport
£ P.O.A
Download PDF
Enter your email address to continue:
Bridgeport VMC XR 1000 Vertical Machining Centre
Photos
Description
Features
Alternatives
Video
Accessories
| Specifications | |
| Control | Heidenhain iTNC 530 |
| | Fanuc 18iMB |
| Axis Travel | |
| Table (X axis) | 1020mm |
| Saddle (Y axis) | 610mm |
| Head (Z axis) | 610mm |
| Distance from table surface to Spindle Gauge Plane | 100mm to 710mm |
| Worktable | |
| Working surface | 1200 x 600mm |
| Table load | 900kg |
| Number of T-Slots | 5 |
| T-Slot Size | 18 mm |
| Positioning | |
| Auto Mode (X and Y axes) | 43/min |
| Auto Mode (Z axis) | 36/min |
| Manual Mode (X,Y and Z axes) | 0-24m/min |
| Feedrate Range (X and Y axes) | 0.025-20m/min |
| Feedrate Range (Z axis) | 0.025-20m/min |
| Acceleration x/y/z | 6/5/4m/ s2 |
| Minimum Increment | 0.001mm |
| Ball Screw Diameter and Pitch(X, Y) | 45 x 16mm |
| Ball Screw Diameter and Pitch (Z) | 45 x 12mm |
| Axes Thrust (X/Y/Z) | Heidenhain 6951/6951/11519N |
| | Fanuc 4712/4712/11130N |
Included Features |
| 12,000rpm Spindle with hybrid bearings with grease replenishment technology |
| Rigid tapping |
| DIN 40 or BT40 spindle |
| 30 Station Swing Arm Toolchanger |
| Spindle eco-cooler (Heat Exchanger) |
| 4th Axis Preparation Prewire |
| Through Spindle Coolant (20 bar) |
| BIG-PLUS Face Taper Contact |
| Swarf Management System incl Chip Conveyor System with full Chip Washdown |
| Renishaw Wireless Probe Package Prewire |
| Dynamic Thermal Compensation |
| 24 Month Parts and Labour warranty |
| Cutter Air Blast |
| Machine Work Light |
| High Retention Drawbar |
| Fully interlocked machine guarding |
To the best of our knowledge the content of this Website are correct, however illustrations, specifications and prices are not binding in detail.