Description
The popular JHC 18S provides grinding capacities from 1 to 50mm with a standard workrest or 40 – 100mm with a special workrest. As with other ‘S’ models, the regulating wheel is controlled by a servo motor resulting in variable speed from 10 – 250rpm.
The performance of all the EUROPA Jainnher machines is strictly inspected for roundness, straightness and surface roughness on standard work pieces. Hydrostatic bearings. Semi hydraulic float bearings. Regulating wheel drive. Spindle oil circulation. Slide device. Wheel dressing device.
Specification |
|
Standard work rest diameter | 0 - 50mm |
Special work rest diameter | 40 - 100mm |
Grinding wheel size : diameter x width x hole | 455 x 205 x 228.6mm |
Regulating wheel size : diameter x width x hole | 255 x 205 x 111.2mm |
Grinding wheel speed | 1500rpm |
Regulating wheel speed | 10-250rpm |
variable speed | |
Grinding wheel motor | 15HP |
Regulating wheel motor | Servo motor 4HP |
Hydraulic pump motor | 1HP |
Coolant pump motor | 1 / 4HP |
Regulating wheel feed on handwheel | 3.5mm (rev) |
0.05mm (Gra) | |
Regulating micro feed on handwheel | 0.1mm (rev) |
0.001mm (Gra) | |
Table feed on handwheel | 9mm (rev) |
0.5mm (Gra) | |
Table micro feed on handwheel | 0.2mm (rev) |
0.001mm (Gra) | |
Dressing handwheel | 2mm (rev) |
0.01mm (Gra) | |
Regulating wheel tilt angle | +5 degrees ~ -3 degrees |
Regulating wheel swivel angle | +/- 5 degrees |
Floor space (approx) | 2300 x 1940 x 1530mm |
Net weight (approx) / Gross weight | 2800 / 3100kgs |
Standard Equipment |
Hydraulic wheel dressing of the grinding and control wheels |
Grinding wheel and grinding wheel flange |
Regulating wheel and regulating wheel flange |
Flange extractor |
Diamond tool |
Thrufeed workrest and blade |
Infeed workrest and blade |
Levelling screw and plate |
Tool box and tools |
Instruction and maintenance manual |