Harrison V660 Centre Lathes
Induction hardened and ground bed. Heavy duty constant power spindle drive motor. Precision hardened and ground gears in headstock. Precision spindle running on Gamet ultra high precision taper roller bearings.
Harrison Model V550 Centre Lathe
HARRISON V550 280mm (11”) centre lathe with induction hardened bedways, quick change universal gearbox, self contained motor driven by 11kw motor and electrical equipment for 380 or 415/3/50Hz supply. Variable speed drive from 18-1800 rev/min with apron mounted controls. Two axis fast traverse with single lever control from apron.Available in 2000mm and 3000mm lengths with rapid traverse as standard.
Harrison V460 Centre Lathe
HARRISON V460 230mm (9 inch) centre lathe with induction hardened bedways, quick change universal gearbox, self contained motor driven by 11kw motor and electrical equipment for 380 or 415/3/50Hz supply. Variable speed drive from 20-2000 rpm with apron mounted controls. Two axis fast traverse with single lever control from the apron.
Harrison V390 Lathe – Gap Bed Lathes UK
HARRISON V390 195mm (7 ½”) Centre Lathe with induction hardened bedways, Quick change universal gearbox, Self contained motor driven by 7.5kw (10hp) motor, Electrical equipment for 380 or 415/3/50Hz supply, Variable speed drive from 14-2500 rev/min with apron control
Harrison M300 Centre Lathe
HARRISON M300 165mm (6.5”) Centre lathe with induction hardened bedways, Quick change universal gearbox, Self contained motor driven by 2.2kw (3hp) motor, Electrical equipment for 220, 380 or 415/3/50Hz supply, 12 spindle speed 40-2500 rpm
Colchester Triumph VS2500 Gap Bed Centre Lathe
Used Colchester Triumph VS2500 short bed lathe in stock. 400mm swing x 650mm between centres. Spindle bore 54mm. Spindle speeds (inf. variable) 15-2500rpm. Equipped with Heidenhain 2 axis DRO system, 3 jaw chuck, Ainjest high speed screwcutting attachment, taper turning attachment, quick change toolpost and 3-off toolholders, lighting, coolant system, rear splashguard.
Europa MA-35 Large Capacity Conventional Lathe
EUROPA MA-35 with centre heights of 445mm to 645mm. Available distances between centres from 1500mm to 12000mm.
EUROPA eturn VS360 manual centre lathe
With a 360mm swing over the bed, centre distances of 750mm and 1000mm, the EUROPA eturn VS360 is an ideal small toolroom machine. need to replace a Colchester student or Master lathe?
Union Graduate GL 42 Woodworking Lathe
Union Graduate GL 42 Woodworking Lathe with a centre height of 150mm. Swing over bed 300mm. Equipped with toolrest and driveplate.
EUROPA eturn VS510 manual centre lathe
EUROPA eturn VS510 – 510mm swing over the bed and offering between centres of 950, 1450, 1950 and 2950mm the EUROPA eturn VS510 provides all round capability.
Harrison V800 Centre Lathes
HARRISON V800 with swing capacities of 660mm and 810mm respectively. Induction hardened and ground bed. Heavy duty constant power spindle drive motor. Precision hardened and ground gears in headstock. Precision spindle running on Gamet ultra high precision taper roller bearings.
Europa MH-50 Heavy Duty Hollow Spindle Lathes
EUROPA large capacity conventional lathes from 3000mm to 12,000mm between centres, 4 shear bedway design with dualway centre guide plus front lateral support for carriage/apron under cutting.
